Preparation and Usage Instructions




Frequently Asked Questions About Peptides

Peptides are molecules formed by the bonding of several amino acids through peptide bonds. These amino acids have endocrine (hormonal) functions, leading to improvements in metabolic performance by triggering the natural release of growth hormone. When this occurs, our ability to build lean muscle and burn stored fat increases significantly. A peptide is not a steroid, nor is it an androgenic hormonal medication.

After the peptide is administered, it sends a selective pulse that stimulates the hypothalamus/pituitary gland to naturally release growth hormone, boosting the body’s own production levels. This pulse can last approximately three hours after application. Once the pulse is triggered, the cells target muscle tissue directly to support its development by increasing cellular synthesis.

Peptides provide a wide range of positive effects on the body, including muscle growth, reduced body fat, enhanced physical performance, and even anti-aging benefits.

Promote muscle growth with significant increases in strength and endurance

  • Improve muscle tone
  • Enhance substance exchange between cells
  • Support tissue repair
  • Reduce inflammation in common tissue
  • Prevent the formation of adhesions and fibrous bands in muscles, tendons, and ligaments
  • Stimulate endothelial cell differentiation (blood vessels)
  • Promote angiogenesis (growth of new blood cells from pre-existing vessels) in dermal tissues
  • Decrease inflammation in tendons and muscles
  • Regulate fat metabolism
  • Stimulate lipolysis (fat breakdown) and inhibit lipogenesis (fat and lipid formation)
  • Anti-aging effects
  • Increased energy and vitality

Peptides may cause mild side effects such as headaches, a warm sensation in the body, or dizziness. These effects are rare and usually occur in individuals who have never taken any form of supplementation before.

Peptides should not be used by individuals with conditions such as cancer, tumors, or thyroid disorders. Since they act as growth hormone analogues, they can create an anabolic environment in the body, which may be unfavorable in such cases.

 

When we talk about cycles, we are referring to a defined period of time during which one or more products are used to achieve noticeable results. These cycles—also known as treatments—can involve combinations of peptides, SARMs, and, in some cases, steroids. A cycle represents the minimum number of weeks required to generate a perceptible stimulus in the body.

This cycle combines the peptide FRAG176-191 with the peptide IPAMORELIN. FRAG176-191 is a modified fragment of amino acids 176 to 191 from the growth hormone, specifically designed to release lipids to be used as energy. This means it selectively targets fat oxidation.

It is engineered to eliminate stubborn fat—particularly in the abdominal and lower back areas—by stimulating lipolysis (fat breakdown) and inhibiting lipogenesis (fat formation). It is paired with IPAMORELIN, a peptide that promotes muscle fiber tightening, with the goal of enhancing muscle texture and definition while reducing fat.

Additionally, IPAMORELIN helps prevent catabolism during low-calorie phases, acting as a protector of muscle tissue. It also possesses anti-inflammatory and joint-regenerative properties, and it contributes to improved skin and hair quality.

This cycle is specifically designed to promote fat loss while enhancing lean muscle definition and quality.

Before reconstitution (lyophilized powder):

Can be stored in the refrigerator (2°C to 8°C / 35°F to 47°F) for up to 36 months.

Can be stored at room temperature (up to 37°C / 99°F) for up to 90 days.

After reconstitution (liquid form):

Must be stored in the refrigerator (2°C to 8°C / 35°F to 47°F).

 

Doses should be taken on an empty stomach to maximize effectiveness (at least 3 hours after your last meal). Do not consume food for at least 15 minutes after your dose. The optimal timing is around 20–25 minutes. GH (growth hormone) pulses are expected to peak approximately 10 minutes after dosing.

Fats and carbohydrates significantly reduce the GH pulse, while protein has no impact. You may have a pure protein source in your stomach at any time without affecting the results.

This cycle combines two peptides: GHRP-2 and CJC-1295. Both are peptides that directly stimulate the pituitary gland to produce more growth hormone. To be more specific, GHRP-2 creates a pulse stimulus, while CJC-1295 creates an amplitude stimulus. This way, we obtain a synergy that generates a double stimulus in growth hormone production, enhancing the construction and recruitment of new muscle fibers, achieving greater muscle texture and hardness.

The gains from this cycle are lean; it does not retain water or fat, which is an added value during bulking phases, in order to not lose muscle quality. Additionally, it allows for natural fat oxidation, since the more muscle you have, the greater the natural fat oxidation.

Doses can be taken throughout the day, but with a minimum interval of 3 hours between each dose. One dose per day is typical for mild injury repair, anti-aging effects, deep sleep, and general well-being.

The most beneficial time to dose is immediately before going to bed. Sleep is when our pituitary gland is most active, the body recovers, and cells repair and grow. Taking 2 or 3 doses per day will provide the added benefit of lean tissue accumulation, muscle growth, and fat loss—assuming your diet consists of high-quality foods.

FREQUENTLY ASKED QUESTIONS ABOUT
SARMs (Selective Androgen Receptor Modulators)

SARMs (an acronym for «Selective Androgen Receptor Modulators») or MSRAs («Moduladores Selectivos de los Receptores Androgénicos» in Spanish), are a unique type of hormone that act as ligands (a molecule that binds to another molecule) which attach to cellular androgen receptors.

SARMs have the ability to stimulate a receptor in a selective way (in this case, targeting bone and muscle). Therefore, they offer benefits comparable to those provided by traditional anabolic steroids—such as increased muscle mass, fat burning, improved bone density, greater strength, and more.

Another advantage of SARMs is that they have fewer unwanted side effects compared to steroids, such as liver toxicity, prostate enlargement, testicular atrophy, acne, gynecomastia, hair loss, etc.

 

Oral route, since the presentation is in drops.

It makes no difference — they can be taken either way, and they will work the same.

Ostarine: 12.5 mg/day (equivalent to half a dropper or 0.5 ml or 15 to 16 drops), taken daily for 8 weeks.
LGD-4033: 5 mg/day (equivalent to half a dropper or 0.5 ml or 15 to 16 drops), taken daily for 8 weeks.

Once a day, even on non-training days, throughout the entire cycle.
If for any reason you forget to take the dose one day, simply continue as normal the next day — do not attempt to double the dose.

No. SARMs are not methylated compounds and therefore do not cause liver toxicity.

It is recommended to stop using SARMs for at least 4 weeks between each cycle.

The timing for taking SARMs is not very important, as they have a long duration of action in the body (24–36 hours). What matters is taking them daily without skipping any days.

The timing for taking SARMs is not very important; the body absorbs them equally well on an empty stomach or with food.

They can be combined without any problem.

Ideally, the diet should match your specific goals. For example, someone looking to burn body fat and define muscle using an Ostarine cycle should follow a high-protein, low-carbohydrate diet. On the other hand, someone aiming to gain muscle mass with an LGD-4033 cycle will see better results with a diet high in both protein and carbohydrates.

Technically yes, but since SARMs compete for the same androgen receptors, combining them is not very efficient. We do not recommend it.

SARMs do not interact with alcohol. Alcohol can be consumed during a SARM cycle without issue, but it is not highly recommended.

To increase SARM results by 30 to 80%, it is recommended to combine them with an oral growth hormone precursor cycle, MK-677.

SARMs do not aromatize, so they do not lead to a significant increase in estrogen levels.

SARMs can lead to a temporary reduction in natural testosterone production, especially during long cycles or when high doses are used. In general, testosterone levels return to normal within one to two weeks. RAD-140 is the SARM that suppresses natural testosterone production the most. LGD-4033 can also cause this effect, but to a lesser degree. Ostarine is the least suppressive of the three.

Yes. The combination protocol is not well-defined, but SARMs can be combined to enhance the results achieved with an anabolic steroid cycle. In particular, RAD-140 is very effective in this regard. However, for anabolic steroid users, it is generally considered better to use a SARM between two steroid cycles to help maintain the results achieved during the cycle.

IMPORTANT NOTE: Under no circumstances do we recommend doing steroid cycles without medical supervision. Steroids can have extremely serious side effects. If you have any doubts, consult your doctor.

In men, it is recommended to take a mild SARM like raloxifene (or toremifene) at the end of each LGD-4033 or RAD-140 cycle to prevent a drop in natural testosterone production. In general, post-cycle therapy is not necessary after a cycle with just one bottle of Ostarine. However, if the cycle includes two bottles of Ostarine, it is recommended to take raloxifene as a precaution.

POST-CYCLE PROTOCOL: take 50 mg of raloxifene powder dissolved in water every day for 10 to 20 days starting from the last day of the SARM cycle.

categorías

categories

cuenta

MY Account

nosotros

about us

X-twitter Instagram

Péptidos Colombia – Ceretropic Lab
All rights reserved 2024.